23 Apr 2026 Good
Printer Bambu Lab A1 mini
WaveOverhangs 0.1.2
Almost perfect, small disconnections between the perimeter, tried replicating the same result as PTSample8 and PTSample14, but with different filament
— Rob
§ GALLERY
Community prints.
Every entry carries the settings that produced it. Filter, compare, learn.
Rating
Display
Printer
Filament
Version
Differs from default
Pick one or more to show only prints where those fields were changed from the slicer's defaults.
Custom query
How this works
Each space-separated word is one condition; every condition must match (implicit AND — no need to type the word AND yourself).
Operators: key=value, key!=value, key>n, key<n,
key>=n, key<=n.
Available keys: rating, wave_version,
filament_type, printer_model, algo,
flow_mm3_per_mm, flow_ratio, line_spacing, line_width, print_speed, travel_speed, fan_speed, nozzle_temp, outer_perim, floor_layers, wall_loops, infill_density, infill_pattern,
Examples: rating=5 · flow_mm3_per_mm>=0.15 infill_density<20 ·
infill_pattern!=crosshatch wall_loops>=3
No prints match these filters.
