Dennis
030-10 As expected similar results as just no floor layers
030-9 
030-8 Even slower does not really seem to matter
030-7 Results seem slightly better with the slower layers ontop of the overhang layer
030-6 Hilbert floor + 30% fan (vs 100% default). Thought slower cooling reduces stress lock-in. However, it warped worse, not better. Hot floor likely sagged into and pulled on the wave during its longer cooldown
Even for cases that can be printed with bridges, result might be better with waveoverhangs.
030-5 60% vs 100% Hilbert curve did not seem to make a difference
030-4 First test with Hilbert-curve settings (https://github.com/dennisklappe/OrcaSlicer-WaveOverhangs/pull/34), definitely some less warping. Will do some more tests and also compare to just no top-layers at all. Will release this later today.
030-3 Tested corner-aware spacing taper (https://github.com/dennisklappe/OrcaSlicer-WaveOverhangs/pull/29) on the small corner, need some more testing to see it's usefulness.
030-2 
030-1 
021-B 
021-A 
021-8 
021-7 
021-6 
021-5 
021-4 
021-3 
021-2 
021-1 
001-11 
001-10 
001-9 
001-8 
001-7 
001-6 
001-5 
001-4 
001-3 
001-2 
001-1