Voron_v1_300_afterburner · Eryone PETG-CF

; (derived from slicer end-of-file config block)

; arc_fitting = disabled
; autoemit_temperature_commands = 1
; automatic_extrusion_widths = 0
; automatic_infill_combination = 1
; automatic_infill_combination_max_layer_height = 100%
; avoid_crossing_curled_overhangs = 0
; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,300x0,300x300,0x300
; bed_temperature = 70
; bed_temperature_extruder = 0
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
; between_objects_gcode = 
; binary_gcode = 0
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 4
; bottom_solid_min_thickness = 0
; bridge_acceleration = 6000
; bridge_angle = 0
; bridge_fan_speed = 50
; bridge_flow_ratio = 1.3
; bridge_speed = 40
; brim_separation = 0
; brim_type = outer_only
; brim_width = 0
; chamber_minimal_temperature = 0
; chamber_temperature = 0
; color_change_gcode = M600
; colorprint_heights = 
; compatible_printers_condition_cummulative = ;"printer_notes!~/.*NO_TEMPLATES.*/ and printer_notes!~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes!~/.*PRINTER_MODEL_MK4IS.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and num_extruders>1)"
; complete_objects = 0
; cooling = 1
; cooling_perimeter_transition_distance = 0
; cooling_slowdown_logic = uniform_cooling
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; custom_parameters_filament = ""
; custom_parameters_print = 
; custom_parameters_printer = 
; default_acceleration = 6000
; default_filament_profile = "Basic PLA @VORON"
; default_print_profile = 0.15mm 0.4nozzle
; deretract_speed = 30
; disable_fan_first_layers = 3
; dont_support_bridges = 1
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0
; enable_dynamic_fan_speeds = 1
; enable_dynamic_overhang_speeds = 1
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = print_end    ;end script from macro
; ensure_vertical_shell_thickness = enabled
; external_perimeter_acceleration = 5000
; external_perimeter_extrusion_width = 0.6
; external_perimeter_speed = 60
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 1
; extra_perimeters_on_overhangs = 1
; extruder_clearance_height = 20
; extruder_clearance_radius = 20
; extruder_colour = #FFE3CA
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 0.93
; extrusion_width = 0.6
; fan_always_on = 1
; fan_below_layer_time = 20
; filament_abrasive = 0
; filament_colour = #FF8000
; filament_cooling_final_speed = 2
; filament_cooling_initial_speed = 3
; filament_cooling_moves = 1
; filament_cost = 100
; filament_density = 1.27
; filament_deretract_speed = nil
; filament_diameter = 1.75
; filament_infill_max_crossing_speed = 0
; filament_infill_max_speed = 0
; filament_load_time = 0
; filament_loading_speed = 14
; filament_loading_speed_start = 19
; filament_max_volumetric_speed = 0
; filament_minimal_purge_on_wipe_tower = 0
; filament_multitool_ramming = 0
; filament_multitool_ramming_flow = 10
; filament_multitool_ramming_volume = 10
; filament_notes = ""
; filament_purge_multiplier = 100%
; filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_retract_before_travel = nil
; filament_retract_before_wipe = nil
; filament_retract_layer_change = nil
; filament_retract_length = nil
; filament_retract_length_toolchange = nil
; filament_retract_lift = nil
; filament_retract_lift_above = nil
; filament_retract_lift_below = nil
; filament_retract_restart_extra = nil
; filament_retract_restart_extra_toolchange = nil
; filament_retract_speed = nil
; filament_seam_gap_distance = nil
; filament_settings_id = "Eryone PETG GF @ Voron Trident"
; filament_shrinkage_compensation_xy = 0%
; filament_shrinkage_compensation_z = 0%
; filament_soluble = 0
; filament_spool_weight = 0
; filament_stamping_distance = 0
; filament_stamping_loading_speed = 20
; filament_toolchange_delay = 0
; filament_travel_lift_before_obstacle = nil
; filament_travel_max_lift = nil
; filament_travel_ramping_lift = nil
; filament_travel_slope = nil
; filament_type = PETG
; filament_unload_time = 0
; filament_unloading_speed = 20
; filament_unloading_speed_start = 100
; filament_vendor = Generic
; filament_wipe = nil
; fill_angle = 45
; fill_density = 25%
; fill_pattern = gyroid
; first_layer_acceleration = 6000
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 70
; first_layer_extrusion_width = 0.6
; first_layer_height = 0.3
; first_layer_infill_speed = 0
; first_layer_speed = 60
; first_layer_speed_over_raft = 30
; first_layer_temperature = 245
; full_fan_speed_layer = 5
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.8
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 80
; gcode_comments = 0
; gcode_flavor = klipper
; gcode_label_objects = octoprint
; gcode_resolution = 0.0125
; gcode_substitutions = 
; high_current_on_filament_swap = 0
; host_type = prusalink
; idle_temperature = nil
; infill_acceleration = 15000
; infill_anchor = 1
; infill_anchor_max = 50
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.6
; infill_first = 0
; infill_overlap = 25%
; infill_speed = 160
; inherits_cummulative = ;"Generic PETG @Template";"Voron_v1_300_afterburner 0.4 nozzle"
; interface_shells = 0
; interlocking_beam = 0
; interlocking_beam_layer_count = 2
; interlocking_beam_width = 0.8
; interlocking_boundary_avoidance = 2
; interlocking_depth = 2
; interlocking_orientation = 22.5
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.3
; machine_limits_usage = time_estimate_only
; machine_max_acceleration_e = 10000
; machine_max_acceleration_extruding = 1500
; machine_max_acceleration_retracting = 1500
; machine_max_acceleration_travel = 1500,1250
; machine_max_acceleration_x = 15000
; machine_max_acceleration_y = 15000
; machine_max_acceleration_z = 500
; machine_max_feedrate_e = 120
; machine_max_feedrate_x = 500
; machine_max_feedrate_y = 500
; machine_max_feedrate_z = 12
; machine_max_jerk_e = 2.5
; machine_max_jerk_x = 10
; machine_max_jerk_y = 10
; machine_max_jerk_z = 0.2
; machine_max_junction_deviation = 0,0
; machine_min_extruding_rate = 0
; machine_min_travel_rate = 0
; max_fan_speed = 65
; max_layer_height = 0.3
; max_print_height = 280
; max_print_speed = 350
; max_volumetric_extrusion_rate_slope_negative = 0
; max_volumetric_extrusion_rate_slope_positive = 0
; max_volumetric_speed = 0
; min_bead_width = 85%
; min_fan_speed = 30
; min_feature_size = 25%
; min_layer_height = 0.0375
; min_print_speed = 50
; min_skirt_length = 0
; mmu_segmented_region_interlocking_depth = 0
; mmu_segmented_region_max_width = 0
; multimaterial_purging = 140
; notes = 
; nozzle_diameter = 0.6
; nozzle_high_flow = 0
; objects_info = {"objects":[{"name":"End Cap.stl id:0 copy 0","polygon":[[129.783,103.883],[132.213,104.210],[154.351,108.746],[156.264,109.394],[157.177,109.828],[158.053,110.331],[159.675,111.534],[161.092,112.973],[161.712,113.770],[162.758,115.498],[163.523,117.367],[163.795,118.340],[164.108,120.335],[164.108,123.355],[163.795,125.350],[163.523,126.323],[162.758,128.192],[162.269,129.076],[161.092,130.717],[159.675,132.156],[158.053,133.359],[156.264,134.296],[155.320,134.657],[153.363,135.155],[131.004,139.685],[129.783,139.807],[127.331,139.800],[124.902,139.460],[123.711,139.166],[121.402,138.340],[120.295,137.811],[119.226,137.207],[117.225,135.790],[115.435,134.113],[113.890,132.209],[112.618,130.113],[112.092,129.004],[111.272,126.693],[110.982,125.501],[110.649,123.071],[110.649,120.619],[110.982,118.189],[111.643,115.827],[112.618,113.577],[113.890,111.481],[114.630,110.502],[116.302,108.708],[118.202,107.157],[120.295,105.879],[122.542,104.898],[123.711,104.524],[126.110,104.019],[127.331,103.890]]}]}
; only_one_perimeter_first_layer = 0
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = [input_filename_base].gcode
; over_bridge_speed = 0
; overhang_fan_speed_0 = 100
; overhang_fan_speed_1 = 75
; overhang_fan_speed_2 = 60
; overhang_fan_speed_3 = 50
; overhang_speed_0 = 20
; overhang_speed_1 = 35
; overhang_speed_2 = 50
; overhang_speed_3 = 75
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = PAUSE
; perimeter_acceleration = 6000
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.6
; perimeter_generator = arachne
; perimeter_speed = 120
; perimeters = 4
; physical_printer_settings_id = Voron
; post_process = 
; prefer_clockwise_movements = 0
; print_settings_id = PETG GF- Trident 0.6mm nozzle 0.3h 0.6w
; printer_model = Voron_v1_300_afterburner
; printer_notes = Unoffical profile.\nE3DV6
; printer_settings_id = Voron_v1_300_afterburner 0.6 nozzle - Copy
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; prusaslicer_config = end
; raft_contact_distance = 0.1
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 3
; raft_layers = 0
; remaining_times = 0
; resolution = 0
; retract_before_travel = 3
; retract_before_wipe = 0%
; retract_layer_change = 0
; retract_length = 0.5
; retract_length_toolchange = 10
; retract_lift = 0.4
; retract_lift_above = 0.2
; retract_lift_below = 500
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 50
; scarf_seam_entire_loop = 0
; scarf_seam_length = 20
; scarf_seam_max_segment_length = 1
; scarf_seam_on_inner_perimeters = 0
; scarf_seam_only_on_smooth = 1
; scarf_seam_placement = nowhere
; scarf_seam_start_height = 0%
; seam_gap_distance = 15%
; seam_position = aligned
; silent_mode = 0
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 1
; skirt_distance = 6
; skirt_height = 0
; skirts = 0
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 5
; small_perimeter_speed = 60
; solid_infill_acceleration = 15000
; solid_infill_below_area = 70
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.6
; solid_infill_speed = 160
; spiral_vase = 0
; staggered_inner_seams = 1
; standby_temperature_delta = -5
; start_filament_gcode = "; Filament gcode\n"
; start_gcode = M104 S0 ; Stops SuperSlicer from sending temp waits separately\nM140 S0\nprint_start EXTRUDER=[first_layer_temperature[initial_tool]] BED=[first_layer_bed_temperature]
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = 0
; support_material_buildplate_only = 1
; support_material_closing_radius = 2
; support_material_contact_distance = 0.2
; support_material_enforce_layers = 0
; support_material_extruder = 1
; support_material_extrusion_width = 0.35
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 1
; support_material_interface_layers = 2
; support_material_interface_pattern = rectilinear
; support_material_interface_spacing = 0.55
; support_material_interface_speed = 100%
; support_material_pattern = rectilinear
; support_material_spacing = 2.5
; support_material_speed = 60
; support_material_style = snug
; support_material_synchronize_layers = 0
; support_material_threshold = 0
; support_material_with_sheath = 0
; support_material_xy_spacing = 150%
; support_remaining_areas_after_wave_overhangs = 1
; support_tree_angle = 40
; support_tree_angle_slow = 25
; support_tree_branch_diameter = 2
; support_tree_branch_diameter_angle = 5
; support_tree_branch_diameter_double_wall = 3
; support_tree_branch_distance = 1
; support_tree_tip_diameter = 0.8
; support_tree_top_rate = 15%
; temperature = 245
; template_custom_gcode = 
; thick_bridges = 1
; thin_walls = 1
; thumbnails = 64x64/PNG, 400x300/PNG
; thumbnails_format = PNG
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.6
; top_one_perimeter_type = none
; top_solid_infill_acceleration = 6800
; top_solid_infill_speed = 120
; top_solid_layers = 4
; top_solid_min_thickness = 0
; travel_acceleration = 10000
; travel_lift_before_obstacle = 0
; travel_max_lift = 0
; travel_ramping_lift = 0
; travel_short_distance_acceleration = 0
; travel_slope = 0
; travel_speed = 350
; travel_speed_z = 0
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wall_distribution_count = 1
; wall_transition_angle = 10
; wall_transition_filter_deviation = 25%
; wall_transition_length = 100%
; wave_overhang_fan_speed = 100
; wave_overhang_flow_ratio = 1
; wave_overhang_line_spacing = 0.35
; wave_overhang_line_width = 0.4
; wave_overhang_narrow_split_threshold = 2
; wave_overhang_outer_perimeters = 1
; wave_overhang_pattern = smart
; wave_overhang_perimeter_overlap = 0.16
; wave_overhang_print_speed = 2
; wave_overhang_travel_speed = 40
; wave_overhangs = 1
; wave_overhangs_instead_of_bridges = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 0
; wipe_tower_acceleration = 0
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_cone_angle = 0
; wipe_tower_extra_flow = 100%
; wipe_tower_extra_spacing = 100%
; wipe_tower_extruder = 0
; wipe_tower_no_sparse_layers = 0
; wipe_tower_width = 60
; wiping_volumes_matrix = 0
; wiping_volumes_use_custom_matrix = 0
; xy_size_compensation = 0
; z_offset = 0