Nogard

Reprint of https://waveoverhangs.com/gallery/201 Default settings except "Replace bridge with WaveOverhang" Technically, it's bridged. But the print went wrong at the start (Clogged nozzle detection by the MK4S after 1 min of overhanging) and the surface is way worth than the "normal" bridging

Default settings, Prusa MK4S with Azure blue PLA Prusament, default temperatures. 2nd print of my 1st test print, but bigger and larger. The overhang was absolute perfection (I was watching over the entire overhang print) and after the layer was placed it was insanely horizontal. But it warped because the layer above the overhang was fast and hot. Beside that, 5/5. Note : After the layer was printed, the nozzle moving across the part was wiggling the thin overhang. Careful with long overhan

Default settings, Prusa MK4S with Azure blue PLA Prusament. Default ORCA temperatures, nothing special except slicing and printing. Slight warp of the top hat because it's a small top. 1st test to save on PLA. Next one will be bigger